Publicité
Les langues disponibles
Les langues disponibles
Section
Built-in CD Player
04
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 17.
1
TRACK NUMBER
Shows the track currently playing.
2
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
to open the front panel.
OPEN
CD loading slot appears.
• After inserting a CD, press
the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
button
EJECT
• You can eject a CD by pressing
• To avoid a malfunction, make sure that no
metal object comes into contact with the front
panel is open.
3 After a CD has been inserted, close the
front panel.
16
En
All manuals and user guides at all-guides.com
1
2
indicator
to select
SOURCE
CD loading slot
EJECT
4 Use
VOLUME
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold 2 or 3 .
6 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• When CD TEXT disc is inserted,
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
disc for damage before inserting the disc
again.
• 5 and ∞ are used at the time of MP3 play-
back.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 45.
.
to adjust the sound level.
lights.
to eject the disc, and check the
ERROR-11
may
Publicité
