Makita PRM0700 Manuel D'utilisation page 119

MAINTENANCE
6. MAINTENANCE
WARNING!
!
the ignition key and read the relevant instructions. Wear suitable clothing
and strong gloves.
IMPORTANT
rised places!
A
CCESS TO MECHANICAL PARTS
Lift the engine cover (1) to access the engine and
mechanical parts below it.
To do so:
– put the machine on level ground, bring the cut-
ting deck into the highest position and put
blocks (2) of around 65 - 70 mm beneath the
edge to hold up the deck during the following
stages.
➤
For mechanical drive models:
– engage the parking brake;
➤
For hydrostatic drive models:
– put the drive release lever into the
«ENGAGED» position (see chap. 4, n° 23),
since it is necessary for the parking brake to
be disengaged to ensure that the speed
change lever has enough movement;
– remove the grass-catcher or stone-guard;
– unscrew the knob on the lever (3) and put the
lever into neutral «N» (
models), or in «R» (
models);
– open the access hatch (4) and unscrew the nut (5) with a 13 mm spanner;
– release the lever (6) so that the deck rests on the blocks and keep the lever
All manuals and user guides at all-guides.com
Before cleaning, maintenance or repair work, take out
Never get rid of used oil, fuel or other pollutants in unautho-
➤
For mechanical drive
➤
For hydrostatic drive
1 3 4
2
7
10
8
EN 29
6
5
6