Publicité
Les langues disponibles
Les langues disponibles
HOW TO OPERATE
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the air purifier into a 120-volt AC electrical outlet.
POWER BUTTON
Turns the air purifier on/off
TIMER BUTTON
Press the timer button until the desired auto-shutoff timer setting is displayed. The timer
button will cycle through the following settings: 4, 8, 12, 18, 24, and off. To cancel the timer
at any time, press the timer button until the LED above the timer button turns off.
LIGHT ON/OFF, WI-FI PAIRING
Press the Light/Wi-Fi button to turn the control panel lights on/off. Press and hold to
enter Wi-Fi pairing mode until you hear a beep.
FAN SPEED
When Auto Mode is selected, "AU" is shown on the digital display. The fan speed auto-
matically adjusts based on indoor air quality. The room air quality PM2.5 particle value
is shown on the digital display and color-coded as:
• Green (good) – operates on fan speed 1.
• Yellow (moderate) – operates on fan speed 2.
• Orange (unhealthy for sensitive groups) – operates on fan speed 3.
• Red (unhealthy) – operates on fan speed 4.
To exit auto mode, select a different speed.
When sleep is selected, "SL" is shown on the digital display. The fan speed is set to a
minimum speed lower than speed 1. The lights will automatically turn off after a few
seconds. To exit sleep, select another fan speed.
Press fan speed 1-4 to manually select desired fan speed.
5
Publicité
