Stanley FATMAX FMHT77419 Mode D'emploi page 19

7. "µA/mA" Terminal
Plug-in connector for the red test lead for the current measurements
< 400mA.
8. "COM" Terminal
Plug-in connector for the black test lead for all measurements.
9. "
Terminal Plug-in connector for the red test lead for all measurements
except current measurements.
10. " " Button
Press this button to turn on/off the backlight.
11. "REL" Button
Used to enter/exit Relative mode.
12. "HOLD" Button
Used to enter/exit Data Hold mode.
READING THE LCD
Symbol Meaning.
Auto Range
Auto Range Auto Range
Auto Range Auto Range
Auto Range Auto Range
Auto Range Auto Range
10. Units on the LCD
mV, V
Voltage unit
mV: Millivolt; V: Volt 1V=10
ɥA, mA, A Current unit
ɥA: Microamp; mA: Milliamp; A: Ampere 1A = 10
10
" Terminal
Continuity test is selected.
Diode test is selected.
Data Hold is enabled.
Relative mode is active.
AC
DC.
Negative sign
Battery is low and should be replaced immediately
Autorange mode is selected.
ɥA
6
.
mV
3
19
mA =
3