lidl BL BZBK 850 A1 Instructions D'utilisation Et Consignes De Sécurité page 17

˜ Troubleshooting
Fault
The product does not work .
The suction power is reduced
and the product does not
vacuum any dirt .
The product overheats .
Dust escapes from the
product .
The air that escapes from the
product smells unpleasant .
The motor is louder than usual . Suction path blocked .
Possible cause
The power plug is not
[ 9 ]
connected to the socket-
outlet .
Dust container full .
[ 4 ]
Suction path blocked .
Motor filter or
[ 10 ]
HEPA filter clogged .
Motor filter or
10 ] [
HEPA filter clogged .
The dust container
[ 4 ]
not installed correctly .
Deposits in the suction
paths, the motor filter
10 ] [
HEPA filter .
The motor is defective .
Action
Connect the power plug
socket-outlet .
Empty the dust container
(see "Emptying the dust container") .
Check the nozzle
furniture brush
18 ] [
tube , the hose
[ 2 ]
container for blockages and
4 ] [
remove them .
Clean the motor filter
HEPA filter (see "Cleaning and
care") .
Clean the motor filter
HEPA filter (see "Cleaning and
care") .
was Install the dust container
(see "Emptying the dust container") .
Clean the motor filter
or
HEPA filter (see "Cleaning and
care") .
Check the nozzle
furniture brush
18 ] [
tube , the hose
2 ] [
container for blockages and
4 ] [
remove them .
Contact customer service (see
"Service") .
to a
[ 9 ]
[ 4 ]
, the
15 ] [ 16 ] [ [ 17 ]
, the telescopic
and the dust
1 ] [
and the
10 ] [
and the
10 ] [
[ 4 ]
and the
[ 10 ]
, the
15 ] [ [ 16 ] 17 ] [
, the telescopic
and the dust
1 ] [
GB/IE/NI 15