Télécharger Imprimer la page

lidl BL BZBK 850 A1 Instructions D'utilisation Et Consignes De Sécurité page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

˜ Emptying the dust container
NOTES:
Empty the dust container
 
possible, since emptying can lead to a cloud
of dust .
Empty the dust container
 
intervals . Otherwise the product could be
damaged .
Press the dust container release
 
dust container
4 ]
[
handle
(Fig . J) .
[
5 ]
Hold the dust container
 
Press the bottom release
 
the dust container
and thus discharge the dust (Fig . K) .
Close the bottom . The bottom release
 
must audibly lock in place .
Insert the dust container
 
The dust container release
lock in place (Fig . L) .
˜ Cleaning and care
m
DANGER! Risk of electric shock!
Disconnect the power plug
socket-outlet before cleaning the product .
Never touch the power plug with moist or
wet hands .
Always keep the power plug and power
cord dry .
m
WARNING! Risk of electric shock!
Never immerse the electric parts of the
product in water or other liquids . Never hold
the product under running water .
outdoors if
4 ]
[
at regular
[
4 ]
. Lift the
6 ]
[
from the product using the
over a waste bin .
[
4 ]
on the side of
23 ]
[
to open the bottom
4 ]
[
23 ]
[
into the product .
[
4 ]
must audibly
6 ]
[
from the
[
9 ]
m
ATTENTION! Do not use any tools to clean
the filters . Otherwise the filters could be
damaged .
m
ATTENTION! Never use the product
without the HEPA filter and motor filter
Otherwise the product could be damaged
and the suction power could be decreased .
Switch off the product and disconnect the
 
power plug
from the socket-outlet .
[
9 ]
Press the hose release
 
hose
out of the intake
[
1 ]
Do not use any corrosive or abrasive
 
cleaning agents .
Remove coarse dirt by hand .
 
Clean the product with a damp cloth . For
 
stubborn dirt, use a damp cloth and a mild
detergent and clean the product again .
Dust container and HEPA filter
(Fig . N)
Remove the dust container
 
(see "Emptying the dust container") .
Pull up the lid lock (top) 
 
lid .
Pull out both cylinders (black and blue) .
 
Separate the cylinders from each other .
 
To do this, turn one of the cylinders
counterclockwise .
Use a damp cloth to clean the dust
 
container
and the two cylinders . You can
4 ]
[
also rinse the dust container and cylinders
under running water .
Pull the filter frame out of the lid .
 
.
10 ]
[
and pull the
21 ]
[
(Fig . M) .
13 ]
[
4 ]
[
. Open the top
3 ]
[
GB/IE/NI
13

Publicité

loading

Ce manuel est également adapté pour:

359284 2007