Genesis GMT15P Manuel D'utilisation page 8

KNOWING YOUR OSCILLATING TOOL
2
3
4
1. ON/OFF Switch
2. Cast Aluminum Gear Head
3. Oscillating Spindle and Blade holder
4. Flush Cutting Blade 1-3/16"
UNPACKING AND CONTENTS
IMPORTANT:
Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Description
Oscillating Tool
1-3/16" Flush Cutting Saw Blade
Allen Wrench
Multi-Purpose Oscillating Tool
Operator's Manual
1
Q'ty Description
1 Cap Screw and Washer
1 Operator's Manual
1
GMT15P
FIG 1
Q'ty
1
1