Télécharger Imprimer la page

Ribimex PRBAT20/NHPSB Manuel D'instructions Et D'utilisation page 10

Publicité

Les langues disponibles

Les langues disponibles

3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be missing
or damaged.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
• Do not overreach. Maintain proper footing and balance at all times.
• Keep the work area clean and well lit.
3.2- Additional safety rules for electric tool
Electric tool
• When the tool is not in use or before performing cleaning, turn it off and remove the battery
pack.
• Do not leave the tool unattended while in use or immediately after use.
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
• Do not operate the tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the tool if the switch does not turn on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Do not use the tool while you are tired or under the influence of drugs, alcohol or
medication.
• This tool is not intended for use by children and persons with physical, sensory or mental
limitations or a lack of experience or knowledge.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the tool or these instructions to operate the tool.
Battery charger (not included)
• Do not abuse the power cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
• Use the power adaptor indoor only.
• Do not place any object on top of charger or on a surface that might block the ventilation
slots and result in excessive internal heat. Place the charger in position away from any heat
source.
• Do not disassemble charger. Take it to authorized service center when service or repair is
required. Incorrect reassemble may result in a risk of electric shock or fire.
• Perform charging in ambient environment.
• Unplug the charger from the main when not in use.
Battery pack (not included)
• Do not incinerate the battery even if it is severely damaged or is completely worn out. The
battery can explode in fire.
• Leakage of liquid from the battery cells may occur under extreme usage or temperature
conditions.
• Do not connect the positive and negative terminals with metal objects. Battery could be
short-circuited and resulted in battery damage or fire.
Page 10 / 22

Publicité

loading

Ce manuel est également adapté pour:

620386