Publicité
Les langues disponibles
Les langues disponibles
7. INSPECTION AND MAINTENANCE
7.1 Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and
care for appropriately. Insufficient maintenance and care may
result in accidents and injuries.
7.2 Inspection and Maintenance
Time Interval
Before start of work
Every 30 operating hours
Every 100 operating hours
8. TECHNICAL DATA
Drive type
Model
Engine
Power
Rated speed
Displacement
Fuel tank volume
Cutting width
Wheel size
Medidas de la caja
N.W.
Prior to any works on the unit, always switch the engine off and
pull the spark plug socket out!
Never use aggressive detergents for cleaning. That could result in
damage or destruction of the unit.
• Check the engine oil level
• Check for any loosen parts
• Exchange the engine oil
• Check the engine oil level
• Clean the air filter
• Remove remnants of grass from rotating parting with a
brush or a blunt tool
• Wipe the body with a soft cloth
• When the dirt is hardened, the unit may be cleaned with
soft cloth wetted in soapy waters
• Check, clean or replace the ignition sparkle plug
Self-propelled
150
4S
3,5 hp
3.000 rpm
150 cc
1 L
360/560 mm
152 mm
705*375*660 mm
36kg
11
Description
EN
Publicité
