Publicité
Les langues disponibles
Les langues disponibles
ling. Otherwise, the fuel could ignite and persons get burnt. Beware
of overfilling the tank. If there is a spill, remove it and clean the unit.
After finishing the refueling, make sure the screwed closure is tight
to avoid loosening in result of vibrations
14. Watch out for any damaged parts. Inspect the machine before
use. Are any parts damaged? Ask yourself seriously when detecting
slight damage whether the machine will work perfectly and safely
despite that. Watch out for proper aligning and adjustment of any
moving parts. Do the parts fit one in another properly? Are the part
damaged? Is everything installed as appropriate? Are any other pre-
requisites of proper working in place? Damaged protective devices
etc. must be repaired or replaced by authorized entitles unless the
operation manual expressly says otherwise. Any defective switches
must be replaced at an authorized servicing centre. Do not use the
machine if it cannot be put on and off with the switch. When re-
pairs are necessary, kindly turn to your local servicing centre.
15. Switch the engine off before any adjustment and maintenance.
That applies to the blades replacement in the first place.
16. Use approved parts only. Use only identical spare parts for
maintenance and repairs. Request advice of an authorized servicing
centre for this purpose.
3. TRANSPORTATION AND STORAGE
• The unit is allowed to be transported with the engine off only.
• Clean the unit thoroughly before putting in on storage.
• Store the unit at a dry clean place.
4. ASSEMBLY AND FIRST START-UP
CAUTION! Oil is not supplied in the engine
crankcase, we recommend using SAE 15W-40.
Assembly parts:
2.1 Emergency Action
Apply the first aid adequate to the injury and get qualified medical
assistance as quickly as possible. Protect the injured person from
more accidents and calm him/her down.
2.2 Assigned Use
The unit is designed only for regular use in agriculture, forestry,
and horticulture and area treatment. The manufacturer should not
be held liable for any personal and material losses due to a failure
to observe these rules.
Fuel or oil may leak at transport. Secure the unit as
appropriate and take preventive action to protect the
environment against contamination.
Assembly of handle:
5
EN
SCAN THE QR CODE
To see the mounting video
Publicité
