Publicité
Les langues disponibles
Les langues disponibles
AC Adapter
1. Make sure that your mains supply matches the type plate of the mains adapter.
2. Connect the AC adapter cable to the DC power jack and the AC adapter to a wall outlet.
Rechargeable battery operation
1. Open the battery compartment cover and insert two of the recommended rechargeable
batteries, matching polarity. (Both batteries must be of rechargeable nickel-cadmium type,
otherwise the batteries may explode or leak).
2. Plug in the AC adaptor and set the Recharge switch to ON position to start charging. (Use
only the AC adaptor supplied with the set for charging.)
3. After 15 hours. Please unplug the AC adaptor and switch the Recharge switch to the "OFF"
position (Do not charge continuously for 24 hours or more. Doing so can cause the
performance of the rechargeable battery to deteriorate).
Note: You may play DISCS whilst charging the batteries.
4. If the operating time decreases drastically even when the rechargeable nickel-cadmium
batteries are properly recharge, purchase a new set of rechargeable nickel-cadmium
batteries.
When charging for the first time or after a long time, playing time may be reduced. In this case,
charge and discharge the batteries several times.
Low Battery Alert
When the low battery indicator
batteries.
Automatic Turn Off
IMPORTANT! If the player is in CD mode in Stop function for approximately 30 seconds,
the player will turn off automatically.
Unit On/Off
Turn unit on:
Turn unit off:
Selecting Modes
In on mode, press the "MODE" button repeatedly to switch between the modes.
Adjust the volume
Rotate the Volume knob to adjust the desired volume.
Switch off the volume restriction
To protect your hearing, after switching on the device, only reduced volume is available. You
can switch off this "Volume restriction".
Press and hold the "EQ / HI VOL" button to de-activate the volume restriction.
Note: The volume restriction is reactivated after switching off or changing the disk.
appears on the display, please prepare to replace the new
BASIC OPERATIONS
Push the "POWER" button in standby mode.
Push the "POWER" button during on mode.
CD9290 / English Instruction Manual
2
Publicité
