Publicité
Les langues disponibles
Les langues disponibles
EN
WARNING! Read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic
safety precautions may result in serious personal injury.
Safety Warnings
● Inspect the product carefully before each use. Ensure the product is not damaged, excessively worn, or missing parts.
● Do not use the product unless it is properly lubricated.
● Using a product that is not in good clean working condition or properly lubricated may cause serious injury.
● Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
Before performing any work on a vehicle or using this product:
● Study, understand, and follow instructions before operating this device.
● DO NOT USE wood blocks or any other non-approved load sustaining devices.
● DO NOT USE wood blocks or any other non-approved lifting devices for a means of lifting with a jack and or load being raised. Failure to head these warn-
ings may cause injury or death.
● Always use jack stands!
● Do not overload the seat (includes user, tools, equipment and personal items).
● Use only on hard, level surfaces, with less than 3 degrees of slope.
● Do not stand on product.
● Keep out of the reach of children! This device is not appropriate for children's use
● Do not use product unless vehicle is properly secured.
● Only attachments and/or adapters supplied by the manufacturer shall be used
● Do not allow anyone under a vehicle that is being repaired, until the vehicle has been properly supported by jack stands
● Use wheel chocks or other blocking devices on opposing wheels before performing work on a vehicle.
● NO alterations shall be made to this product.
● Do not use the product for any use other than the manufacturer specified usage.
● Failure to heed these markings may result in personal injury and/or property damage.
TECHNICAL DATA
Dimensions:
* Rolling Tool Seat (with tool case)
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included inthe product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
2
435 x 355 x 350 (mm)
WWW.NIKOLAOUTOOLS.GR
Item
Description
1
Seat
2
Metal frame
3
Plug
4
Cross - recess screw M6x45
5
Plastic tray
6
Base
7
Hex Bolt M8x60
8
Caster wheel
9
Flat washer Ø8
10
Cap nut M8
11
Flat steel frame supports
Qty
1
2
6
4
1
1
4
4
4
4
2
Publicité
