Publicité
Les langues disponibles
Les langues disponibles
Putting into Service
Electrical Connection
1. Connect the device to a duly installed 220-240V~ 50/60Hz protective
contact socket.
2. Before inserting the plug into the socket, make sure that the mains voltage
to be used matches that of the device. You can find this information on the
nameplate.
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1.
Attach the blender shaft on the motor unit and rotate until it locks.
2.
Immerse the blade guard completely in the ingredients. Then press the
switch (I) or turbo switch (II).
3.
Move the appliance slowly up and down and in circles to blend the
ingredient.
4.
Unplug then remove the blender shaft after use.
5.
You can use the hand blender in the measuring beaker and just as well
in any other vessel.
Important:
Short-time operating. Use the appliance for no longer than 1
minutes and leave it cool down for at least 1 minute before using again.
Cleaning
Risk of electric shock!
Before you clean the hand blender, unplug the appliance from the power
socket. Under no circumstances may the motor unit be cleaned by immersing it
in water or holding it under running water.
Clean the motor unit, the hand blender, with a moist cloth.
•
After processing very salty food, you should rinse the blades right away.
•
Ensure that water cannot permeate through the openings of the hand
•
mixer. For stubborn soiling use a mild detergent on the cloth.
Clean the rest of the attachment components under running water and dry
•
them off well with a dish towel.
Instructions for use
English
3
Publicité
