IDEAL SK642 Manuel Du Propriétaire page 3

8. Buzzer (built-in siren)
9. DC 9V Jack
10. HOME on/off Switch
11. Battery Cover
12. External Trigger Input Terminal
13. 9V Battery
14. RESET button
15. Wireless Water Overflow Sensor
FEATURES
 The water detector included in this package has been pre-learned to zone 1. You may
change this by following the learn instructions further in this manual.
 Wireless Water Sensor, detects water and sends out RF signal to auto-dialer, and
activates built-in siren in both the auto dialer and water detector if on. (optional)
 16 Digit large number display with date/time and function icon.
 10 zone icon for easy differentiation of sensor locations.
 Zones 1 to Zone 7: Learn one wireless sensor to each zone to trigger the system
(In ARM mode only)
 Zone 8S: Learn up to 8 wireless sensors to trigger the system (In ARM mode only)
 Zone 24H (24 hours stand by): Learn up to 8 wireless sensors to trigger the
system in ARM or DISARM mode.
 Remote zone: Learn and connect up to 8 remote controls.
 Room monitor by telephone function.(listen to room activity following alarm)
 ARM or DISARM system by telephone.
 Programmable password, entry delay timing (set time for how long after trigger
before the auto dialer will dial out and siren will sound)
 Up to 5 emergency telephone numbers (up to 32 digits each) (only last 16 digits
appear on LCD screen)
 Programmable auto dialing cycle (how many times the auto dialer will dial each
programmed number)
 Records up to five triggered alarms for alarm mode.
 Built-in flash memory to protect system data during a power failure. If you have a
power failure and the battery dies, all info will remain in auto dialer except the date
and time. We recommend that the battery in the dialer be changed at least once per
year, as you change your smoke detector battery.
 Battery Low indicator.
 Tone dialing only.
 HOME mode function (auto dialer will chime when sensors are triggered instead of
siren sound)
 Auto-dialer has optional built-in 105 dB alarm (with programmable ON/OFF alarm)
 External extend trigger input terminal (to connect Ideal's wired window and door
contacts SK619)
 AC adaptor and 9V battery back-up (included)