BorMann PRO BVC3410 Mode D'emploi page 4

EN
Operating instructions
Wet vacuum cleaning
Unplug before change filter (Figure 1)
Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet vacuum-cleaning.
Insert the plug and turn on the switch, then appliance starts to work (Figure 4 & 5a or 5b)
The dust bag included upon delivery is not suitable for wet vacuum-cleaning!
Dry vacuum cleaning
Unplug before change filter (Figure 1), then take out the bag and empty the dust or replace the bag. Slip the dust bag onto the socket(figure 2) for dry
vacuum-cleaning.
Insert the plug and turn on the switch, then appliance starts to work (Figure 5 & 6a or 6b)
The dust bag is suitable only for dry vacuum-cleaning!
Maintenance and care
Unplug before maintenance (Figure 1)
Take off the foamed plastic filter (Figure 3), and wash by water (Figure 5)
IMPORTANT: Do not use detergents to clean the filter. The filter must be thoroughly dry before the machine is used.
Repairs
Only use accessories and spare parts recommended by the manufacturer. If the equipment should fail some day in spite of our quality controls and your
maintenance, only have it repaired by an authorized electrician.
Correct disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used devilce, please use the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
4
WWW.NIKOLAOUTOOLS.GR