Publicité
Les langues disponibles
Les langues disponibles
The numbers in illustrations refer to important work steps or to components important for the
work steps. In the text, the corresponding numbers draw attention to these work steps or compo-
nents, e.g. (3).
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
This symbol is intended to draw your special attention to certain points for handling the product.
1.3
Symbols on the product
1.3.1
General symbols
The following symbols can be used on the product:
No-load speed
Revolutions per minute
Revolutions per minute
Diameter
Saw blade
Direct current (DC)
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Li-ion battery
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed Intend-
ed use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.3.2
Warning symbols
Warning symbols warn of dangers.
Keep hands away from saw blade
1.3.3
Command symbols
Command symbols indicate binding actions.
Always work with both hands.
Wear eye protection
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
2
English
2412811
*2412811*
Publicité
