Oceanic OCEAFC244W Guide D'utilisation page 33

Thermostat knob
Your appliance has one control for regulating the temperature. The
temperature control is located at the top of the appliance.
The first time you put your appliance into operation, set the thermostat to 4
and let it run empty for 4 hours before storing food for it to cool sufficiently.
The temperature control ranges from position "1" (the warmest) to position
"7" (the coldest). Adjust the temperature control to the setting that best suits
your needs. Setting 4 should be appropriate for home or office refrigerator
use.
To turn the appliance off, turn the temperature control to "0".
Appliance thermostat has 7 settings. The appliance assures that the
temperature is maintained as long as it is in operation and used in normal
conditions of use. The temperature inside the appliance can be influenced
by many factors, including ambient temperature, sun exposure, the
frequency with which the door is opened, and amount of food stored. Slight
changes in temperature are normal.
Settings 1-2: fridge compartment average temperature of 8 to 11 °C,

freezer compartment average temperature <=-15 °C
Settings 3-4: fridge compartment average temperature of 5 to 9°C,

freezer compartment average temperature <=-18°C
Settings 5-7: fridge compartment average temperature <=4°C, freezer

compartment average temperature <=-20 °C
NOTE:
Turning the temperature control to the "0" position stops the cooling

cycle but does not shut off the power to the appliance.
If the unit is unplugged, loses power or turned off, wait 3 to 5 minutes

before restarting the unit. If you attempt to restart before this time delay, the
appliance will not start.
If you choose to change the thermostat setting, adjust the thermostat

control by one setting at a time. Allow several hours for the temperature to
stabilize between adjustments.
33