Oceanic OCEAFC244W Guide D'utilisation page 26

INSTALLATION INSTRUCTIONS
Before putting your appliance into service
 Remove all inner and outer packaging components.
Check that none of the following parts are missing:

NO.
1
3
Before connecting your appliance to a power supply, allow it to stand

upright for about 2 hours. This reduces the risk of malfunction of the
refrigeration system due to handling during transport.
Clean the inner surfaces of the unit with a soft cloth and warm water.

Place your unit on a floor strong enough to support the weight of the

fully filled unit.
Make sure the unit is level by adjusting the front feet underneath the

unit. Make sure that the appliance rests on its feet in a stable manner.
Install the appliance away from direct sunlight and heat sources

(radiator, hot plate, etc.). Direct sunlight can damage the unit's coating and
heat can increase its power consumption. If the ambient temperature is
extremely cold or hot, this may prevent the unit from operating properly.
The unit is not designed to be installed in a basement or appliance.

Caution: Make sure that the unit is kept away from any substance

that may cause combustion.
Check that the water tank is in place before connecting the unit.

POWER FAILURE
If there is a power failure, do not open the appliance door. Frozen food
should not be affected if the power failure lasts for less than 15 hours. Do
not refreeze frozen foods that have thawed completely. The food may be
dangerous to eat.
CLEANING AND MAINTENANCE
Cleaning your appliance
Unplug your appliance and remove all the food.

Clean the inner surfaces with warm water and a mild detergent.

Contents
Main appliance
Operation manual
26
BCD-261(E)
1 unit
1 copy