Powerplus POWXG1032 Mode D'emploi page 52

4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury
or damage to the tool.
Read manual before usage
Wear protective helmet
Wear safety cut through
resistant shoes with safety
sole and steel toe.
Never operate the machine in
the rain or in damp or wet
conditions. Moisture is an
electrical shock hazard.
Remove plug from the mains
immediately if the cable is
damaged or cut
Class. II -Double insulated
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
▪
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
▪
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
Copyright © 2022 VARO
POWXG1032
P a g e | 4
Wearing of protection against
noise advised
Wearing of protection
goggles advised.
Wear protective helmet
Wear protective gloves
Electrical hazard, keep at
least 10m distance away
from electrical power lines.
Keep bystanders away
Remove plug from the mains
before doing any work on the
chainsaw
In accordance with essential
applicable safety standards
of European directives
www.varo.com
EN