JVC DLA-HD250 Manuel D'instructions page 35

Input Signal > Over Scan
Over Scan
18
Selects whether or not to set over scan for the SD video signal.
On
Off
●
This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
Mask
19
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
●
Masking is available only when high definition images are input.
Input Signal > Film Mode
Film Mode
20
Selects this to view movies shot on film.
Auto
Off
●
This setting is not available when a progressive signal is input.
Over scan the top, left, bottom and right at 2.5% each.
Do not over scan.
Mask 2.5% of the screen.
Mask 5% of the screen.
No masking.
For normal circumstances, select this setting.
Select this when you are not watching movies shot on film.
ENGLISH
35