Publicité
Les langues disponibles
Les langues disponibles
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect Wi-
Fi Direct devices to the product and each other using
a peer-to-peer network, without a wireless router.
✎
Some Wi-Fi Direct devices may not support the
DLNA function if connected via Wi-Fi Direct. If
this is the case, change the network connection
method you used to connect the device to the
home cinema.
✎
Wi-Fi Direct transmissions can interfere with
Bluetooth signals. Before you use the Bluetooth
function, we strongly recommend that you turn off
the Wi-Fi Direct function on any device in which
it is currently on.
1.
Turn on the Wi-Fi Direct device and activate its
Wi-Fi Direct function.
2.
In the Home screen, select Settings, and then
press the E button.
Select Network, and then press the E button.
3.
Select Wi-Fi Direct, and then press the E
4.
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Wi-Fi Direct
Display
Device Name : HT-H5500K
Audio
Select your Wi-Fi Direct device to connect to.
Network
System
AndroidXXXXXXX
Not Connected
Language
Security
General
Support
5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
2.
When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Select OK, and then
press the E button to accept.
3.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then enter
it into the appropriate field in the Wi-Fi Direct
device you want to connect.
4.
The Connecting pop-up appears, followed by
Refresh
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
Close
screen as connected.
✎
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi
Direct function.
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.
23
- English
Publicité
