Klarstein VINSIDER VICTORIA 28 UNO Mode D'emploi page 33

INSTALLING THE HANDLE AND
REVERSING THE DOOR
Installing the handle
The handle is delivered in a separated package with
screws together inside the carton.
1. Reveal two small holes on the door frame from
inner side by pulling out a bit the door seal.
2. Aim the handle to the holes and insert the screws
from inside.
3. Screw them up with screw-driver.
4. Put back door seal to cover the screws
Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse
the opening direction:
Open the door at 90 degrees and keep
it steady.
Unscrew the M5*16screws
dismantle the right upper hinge
and remove the door.
Unscrew the M5*16screws
dismantle the right lower hinge
②
,
③
,
②
,
⑤
.
EN
33