Télécharger Imprimer la page

Eureka 930 Serie Guide Du Propriétaire page 10

Publicité

1.
2.
4.
6.
10
5.
ENGLISH
INSTRUCTIONS FOR USE
Before operating the vacuum cleaner, make certain that the dust bag
and filters are in the proper position.
1 Pull all of the power supply cord out from back of cleaner and plug
into electrical outlet.
Note: When pulling on power supply cord watch for a yellow line on
the cord. Then continue slowly pulling on cord till you see the red
line, stop. The red line indicates the end of usable cord.
2
Push the ON/OFF ( I ) button to switch the cleaner on.
3
To rewind the power cord, press the rewind button with foot and
guide the cord with hand to ensure that it does not whip causing
damage.
5
The suction control button on the hose handle is used to reduce suc-
tion for delicate work such as cleaning drapes or picture frames.
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once
a week over the entire area. Vacuum slowly, making several passes (for-
ward and backward), covering small areas at a time. The time required to
clean will depend on several factors - including type of floor and amount
of dirt.
CLEANING TOOLS
4*
Combination Floor Nozzle: For carpets or hard surface floors.
5
Hose Suction Control Button: For use to increase or decrease
suction when using cleaning tools.
Combination Crevice Nozzle/Brush Tool: For crevices, corners,
6
baseboards, between cushions.
* Depending on model

Publicité

loading