Ce Declaration Of Incorporation - GF EA 11 Manuel D'utilisation

CE Declaration of incorporation

13 CE Declaration of incorporation
CE declaration of incorporation for incomplete machines (Machinery directive
2006/42/EC, Annex II B) and CE declaration of conformity as per EMV- and low
voltage directive (2004/108/CE), (2006/95/CE)
Manufacturer:
Georg Fischer Piping Systems Ltd., Ebnatstrasse 111, 8201 Schaffhausen /
Switzerland
Person authorised to compile technical documentation:
Georg Fischer Piping Systems Ltd., R&D Manager,
Ebnatstrasse 111, 8201 Schaffhausen / Switzerland
We hereby confirm that the following incomplete machine
Electrical actuator
Type: EA11, EA21, EA31, EA42
Variants: 24V AC/DC, 100-230V AC
Article numbers: 198 150 180, 198 150 181, 198 150 182, 198 150 183, 198 150 184,
198 150 185, 198 150 186, 198 150 187
fulfils all the basic requirements of the machine directive 2006/42/EC, as far as the
scope of delivery allows.
We further declare that the special technical documentation has been compiled in
accordance with Annex VII, Section B of this directive. We shall forward this, if
requested, to the competent authorities via the aforementioned authorised person.
Commissioning is prohibited until it has been established that the entire machine,
into which the aforementioned incomplete machine is to be incorporated, meets the
provisions of the machine directive 2006/42/EC.
The incomplete machine also meets the requirements of the following European
directives and the national legal provisions implementing them and the relevant
harmonised standards below:
 Electromagnetic compatibility – Directive EMV (2004/108/CE)
 Low voltage directive (2006/95/CE)
 EN 15714-2 (Electrical actuators for industrial valves)
 ISO 5211 (actuator interface)
 EN 60068-2-6 (vibration tests)
 VDE 0843 section 20 (EMV requirements)
Name: Antonio De Agostini
Position: R&D Manager
Georg Fischer Piping Systems
Date: 2013-08-09
62
Electrical actuators type EA 11/ 21/ 31/ 42