Ready To Operate (Only Ea21 - 42) - GF EA 11 Manuel D'utilisation

Operation
WARNING
Damage to the actuator by short circuit or corrosion!
Moisture and/or dirt in the actuator.
 Make sure that no water has got into the actuator.
 Screw cover screw 2 after using the manual emergency override back
into the actuator.
 Take crank handle 1 away.
 Screw cover screw 2 on again. Beforehand make sure that no water has entered
the actuator.
 Put crank handle 1 back into holder.
8.3 Ready to operate (only EA21 – 42)
The EA 21/ 31/ 42 has a temperature monitor (ready for operation monitor).
 Make sure that actuator is properly connected, see section 7.2 Connection
diagram.
56
Electrical actuators type EA 11/ 21/ 31/ 42