Sanitas SIL 45 Mode D'emploi page 69

Guidance and manufacturer's declaration - electromagnetic emissions
The MODEL SIL 45 is compliance for each EMISSIONS test specified by the standard, e.g. EMISSIONS
class and group.
Emissions
RF emissions Group 1
CISPR 11
RF emissions Class B
CISPR 11
Harmonic Class A
emissions
IEC 61000-3-2
Voltage fluctua- Complies
tions/
flicker emissions
IEC 61000-3-3
Guidance and manufacturer's declaration - electromagnetic immunity
The MODEL SIL 45 is compliance for each IMMUNITY test specified by the standard, e.g. IMMUNITY
test level.
Immunity test
Electrostatic ±8 kV contact
discharge (ESD) ±2 kV, ±4 kV, ±8 kV, ±15 KV air
IEC 61000-4-2
Radiated RF
EM fields
IEC 61000-4-3
Electrical fast ±2 kV
transient/burst 100 kHz repetition frequency
IEC 61000-4-4
Surge ±0.5 kV, ±1 kV line-to-line;
IEC 61000-4-5 ±0.5 kV, ±1 kV and ±2 kV
line-to-ground
Conducted
disturbances
induced
by RF fields
IEC 61000-4-6
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Compliance
The MODEL
tion. Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
The MODEL
cluding domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
IEC 60601-1-2 test level
10V/m
80MHz-2.7GHz
80% AM at 1kHz
3V
0.15MHz-80MHz
6V in ISM and
amateur radio
bands between
0.15MHz and
80MHz
80% AM at 1kHz
Electromagnetic environment - guidance
SIL 45
uses RF energy only for its internal func-
SIL 45
is suitable for use in all establishments, in-
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 KV air
±2 kV
100 kHz repetition frequency
±0.5 kV, ±1 kV line-to-line;
±0.5 kV, ±1 kV, and ±2 kV
line-to-ground
69
Compliance level
10V/m
80MHz-2.7GHz
80% AM at 1kHz
3V
0.15MHz-80MHz
6V in ISM and
amateur radio
bands between
0.15MHz and
80MHz
80% AM at 1kHz