2measure 260302 Notice D'utilisation page 7

Time display format (12 or 24 h):
In order to change the time display format on the screen, push the "UP" button once. In order to switch
to 12-hour format, it is necessary for the hour set to be within the range from 12:00 to 23:59.
Temperature display format (°C or °F):
In order to change the temperature unit displayed on the screen, push the "DOWN" button once.
Temperature alarm settings:
In order to configure the temperature alarm, press and hold the "UP" button. The number specifying the outdoor
temperature will start
CH 1, 2 or 3 (depending on the number of wireless sensors connected) to which the alarm is to be adjusted.
Use the "UP" and "DOWN" buttons to select the appropriate value and then use the "MODE" button to move
to setting of the next function. After configuring all the functions, pushing the "MODE" button again returns
the station to the normal display mode.
Function setting order:
1. Alarm activation temperature - lower range
2. Alarm activation temperature - upper range
3. Alarm activation (ON/OFF)
Screen backlight:
When the station operates on battery power supply, pushing the "SNZ" button will result in the display becoming
backlit for 5 seconds. After connecting the power supply unit, the display will be backlit permanently.
Waste electrical and electronic equipment must not be discarded into a waste bin. Selection and correct
disposal of waste of this type contributes to protection of the natural environment. The user is liable
for delivering the waste equipment to a specialised collection point, where it will be accepted without charging
any fee. Information on such collection point can be obtained from local authorities or at the point of purchase.
Please note!
Every household uses electrical and electronic equipment and, therefore, is a potential producer of waste that
is hazardous to people and the environment due to presence of hazardous substances, mixtures,
and constituents in the equipment. On the other hand, waste equipment constitutes valuable material
from which raw materials such as copper, tin, glass, iron, etc. can be recovered.
The symbol of a crossed-out rubbish bin placed on equipment, packaging, or accompanying documents
means that the product must not be disposed of together with other waste. Such a marking means at the
same time that the equipment was placed on the market after 13th of August 2005.
The user is obligated to provide waste equipment to the designated waste collection point for appropriate
processing. You can find information on the available system for collecting waste electrical equipment
at a given store's enquiry point and at the city hall/municipal office. Proper handling of waste equipment
prevents negative consequences for the natural environment and human health!
Producer BROWIN Sp. z o. o. Sp. k. ul. Pryncypalna 129/141, PL 93-373 Łódź represents that the appliance
of 2measure brand, 260302 model, is compatibles with the Directive 2014/53/EU of the European Parliament
and the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to making
available on the market of radio equipment and repealing the Directive 1999/5/EC. Full Declaration
of Conformity is available at the website www.browin.com
flashing. Use the
WASTE MANAGEMENT
"CH" channel to
7
select the transmission channel
-