Publicité
Les langues disponibles
Les langues disponibles
MIC LEVEL
–20 — +08 (0): The sensitivity of the microphone increases as the number
increased.
NOISE RDCT
–05 — –20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL
1 — 10 (4): Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
Bluetooth mode operations
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
1 Press the volume knob to select a name or a phone number.
RECENT CALL
• ">" indicates call received, "<" indicates call made, "M" indicates call
missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, "SEND P.BOOK MANUALLY" appears. Transfer the phonebook
manually. ( 15, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as "Ú" is
showns as "U".)
• If the phonebook contains many contacts, ( 14, Select a contact by
name).
Default: XX
DIAL NUMBER
VOICE
Speak the name of the contact you want to call or the voice command
to control the phone functions. ( 14, Use Voice Recognition)
SETTINGS
AUTO ANSWER
RING TONE
MSG NOTICE *
* Functionality depends on the type of the phone used.
Text message notification
When the phone receives a text message, the unit rings and "RCV
MESSAGE" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
1 Turn the volume knob to select a number (0 to 9) or character
( , #, +).
2 Press S / T to move the entry position.
1
2
Repeat steps
and
until you finish entering the phone
number.
3 Press the volume knob to call.
01 SEC — 30 SEC: The unit answer incoming call automatically in
the selected time (seconds). ; OFF: Cancels.
IN UNIT: The unit rings to notify you when a call/text message
comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for
incoming calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
IN PHONE: The unit uses the connected phones' ring tone to notify
you when a call/text message comes in. (The connected phone will
ring if it does not support this feature.)
ON: The unit rings and "RCV MESSAGE" appears to notify you of an
incoming text message. ; OFF: Cancels.
BLUETOOTH®
Default: XX
13
ENGLISH |
Publicité
