System Setup - Zeiss Acuitus 5000 Manuel D'utilisation

The Acuitus has four buttons with permanent functions to the right of the screen. These are Help/Setup, the
Up Arrow and Down Arrow, and Print.
The five buttons underneath the screen are called soft buttons because they change function according to
the icon that appears on the screen above them. When no icon appears above a button, the button has no
function for that particular screen. (See the icon glossary on page 20.)

System Setup

Before you use the Acuitus for the first time, it is necessary to select the software settings you want to use
for refraction, the printouts, and other features of the refractor.
Turn on the refractor and press the Help/Setup button that is just to the right of the screen. The help screen
will appear.
The help screen
Model 5000 does not have keratometry, CL Base Curve
and Auto/Manual options.
Then press the soft button below the Setup icon to bring up the first setup screen where you can
view or change the system settings.
1.Use the Up Arrow and Down Arrow buttons to scroll through the options in each field.
The last shown option will become the new default.
2. Use the button below the Next icon to move from one setup option to another.
3. Press the button below the Page Down icon to reach the second setup screen where
you can set the time and date and select printout options.
Zeiss Humphrey Systems Acuitus User Manual
PN 50648 Rev A June 2001
3