11.USING THE FOOTREST – FIGURE 20: To adjust the footrest, hold the release button on both sides and place
it in the desired position.
12.FOLDING THE STROLLER - FIGURES 21-23: Before folding the stroller, activate the parking device and fold
the canopy.
Figure 21: Fold the seat by pulling the button on the back of the backrest.
Figures 22: Press the folding button, adjust the handle to its lowest position and push the frame forwards until
it folds.
Figure 23: The baby stroller in folded position
13. INSTALLING THE CARRYCOT – FIGURES 24-26: Place the seat on the installation points on each side of the
frame.Press down, until you hear a clicking sound and the carrycot locks into place (Figure 24). Press and hold
the buttons on either side of carrycot, then pull the canopy forwards, in order to unfold it and backwards – in
order to fold it (Figure 25). Insert the foot cover and secure it to the carrycot with the zipper (Figure 26).
Removing the carrycot from the frame: press the buttons on either side of the frame and pull the carrycot up.
13.5-POINT SAFETY BELT – FIGURE A: Follow the steps, described in Figure A. To attach the belt, insert the two
tabs of the lap belt into the buckle on both sides, should click when properly inserted. The shoulder straps are
fitted as the metal tabs are assembled and inserted into the buckle. The sliding adjusters are fitted and must
be carefully adjusted on each side so that the belt is fastened around your child without causing discomfort. To
release the bely, press the buckle button, and pull to open.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Regularly check the locking devices, brakes, safety belts and buckles, connectors and fixing mechanisms in order to be
sure that they are in good working order and are not worn or damaged.
2. If you find loose, broken and damaged parts, they should be repaired by an authorized service or replaced with original
parts. Otherwise the warranty of the stroller will be annulled.
3. Do not make modifications on the construction and do not replace the work parts with ones that are поt suitable and
are not original. This may lead to incorrect functioning of the stroller and to injury of your child. And also to annulment of
your warranty of the stroller.
4. In order to clean the cover, the dirty plastic and metal parts of the product, use soft cotton cloth or sponge, wetted
with water.
5. Never clean with agents containing abrasive particles, ammonia, bleach or alcohol. DO NOT wash in the laundry the
removable and accessories – parts and accessories – canopy, etc., because this may lead to their damage. Otherwise the
warranty will be annulled.
6. Always after cleaning leave the stroller to dry completely and afterwards use it or store it.
7. Store the stroller indoors. The effects of the environment – sea air, roads sprinkled with salt, acid rains, etc., as well as
the storage outdoors lead to the emergence of corrosion.
8. Do not store the stroller in a humid environment. In case you have used the stroller in a humid environment, you
should unfold it, wipe it with a dry cloth and let it dry completely naturally. It is possible for mold to appear, if you store it
while wet.
9. Too much sunlight will affect the aging of the stroller parts and the fabric.
10. Do NOT place other objects inside the stroller – luggage , bags with goods, handbags etc. when you use it or storage it,
because this could damage the stroller and may lead to harm your child inside of it.
Not following this instruction will lead to guarantee cancel.
Manufactured for Cangaroo in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90
Website:
www.cangaroo-bg.com
11