Qlima S 2320 Manuel D'utilisation page 156

A guide on using the infrared remote is not included in this literature package. Not all the functions
are available for the air conditioner, please check the indoor display and remote control of the unit you
purchased.
Other features
• Auto-Restart(some units)
lf the unit loses power, it will automatically restart with the prior settings once power has
been restored.
• Anti-mildew (some units)
When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up condensed water and prevent mildew growth.
• Wireless Control (some units)
Wireless control allows you to control your air conditioner using your mobile phone and a wireless
connection. For the USB device access, replacement, maintenance operations must be carried out by
professional staff.
• Louver Angle Memory(some units)
When turning on your unit, the louver will automatically resume its farmer angle.
• Active Clean function(some units)
-- The Active Clean Technology washes away dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing the frost. A "pi-pi" sound will be heard.
The Active clean operation is used to produce more condensed water to improve the
cleaning effect, and the cold air will blow out. After cleaning, the internal wind wheel then
keeps operating with hot air to blow-dry the evaporator, this keeping the inside clean.
-- When this function is turned on, the indoor unit display window appears "CL" , after 20 to
130 minutes, the unit will turn off automatically and cancel Active Clean function.
-- For some units, the system will start hightemperature cleaning process, and the temperature
of air outlet is very high. Please keep away from it. And this would lead to the rising of the
room temperature.
• Breeze Away (some units)
This feature avoids direct air flow blowing on the body and make you feel indulging in silky coolness.
• Refrigerant Leakage Detection (some units)
The indoor unit will automatically display "ELOC "or flash LEDS (model dependent ) when it detects
refrigerant leakage.
• Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
And the Sleep function is not available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 1 °c (2° F) after 1 hour, and will increase an additional 1 °c (2° F) after
another hour. When in HEAT mode, the unit will decrease the temperature by 1 °C (2° F) after
1 hour, and will decrease an additional 1 °c (2° F) after another hour.
The sleep feature will stop after 8 hours and the system will keep running with final situation.
4
156