Publicité
Les langues disponibles
Les langues disponibles
allow children to play with the product. Never
allow children to clean or maintain this product
unsupervised.
Do not leave the product or packaging material
lying unattended. Plastic films or bags, or plastic
parts etc. can turn into dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Ensure that any electrical installation is performed
by a qualified electrician or a person trained to
carry out electrical installations, in compliance
with the applicable standards.
Never use the product if it is damaged in any way.
Remove the fuse or switch off the circuit breaker
(0 setting) in the fuse box prior to installation.
Never allow the ceiling fan or the LED light to
come into contact with water or other liquids.
Never open any of the electrical equipment or
insert any objects into this equipment. Such inter-
ferences pose a risk of fatal injury from electric
shock.
Prior to installation, make sure that the available
mains voltage corresponds to the required ope-
rating voltage of the ceiling fan (see "Technical
data").
Be sure not to damage any wires during installation.
Do not install the product on damp or conductive
surfaces.
This ceiling fan with LED light is not
suitable for dimmers or electronic
switches.
Only insert the light bulb in a dry
environment.
Prevent fire and
injury hazards
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES! To prevent
burns, ensure that the product has been
switched off and has cooled down before tou-
ching the LED light. Illuminants become very hot.
Do not look directly into the light source. Do not
look at the light source with an optical instrument
(e.g. magnifying glass).
18 GB/IE
Replace defective light bulbs with new ones im-
mediately. Before changing the light bulb, make
sure that the circuit to which the product is connected
is not live. To do this, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse box.
Allow the LED light to cool down for at least
15 minutes before replacing a defective bulb.
Do not under any circumstances use the product
to store or hang up other objects.
Never use the connection cable to carry the
weight of the product.
tions, stop using the ceiling fan immediately and
consult qualified personnel.
Should doubts arise during assembly / use of
the product, consult a qualified electrician.
For your safety!
Install the ceiling fan in a location where it is
protected from moisture and dirt.
A ceiling height of at least 2.50 m is required for
safe operation. The fan blades must be at least
2.3 m away from the floor and 0.6 m away from
the nearest wall or item of furniture. The ceiling
to which the product is mounted may slope by
a maximum of 30 °.
Always be alert! Always pay attention to what
you are doing and always use common sense.
Do not install the product if you are having dif-
ficulty concentrating or do not feel well.
Do not operate the product if the ambient air
temperature is over 40 °C.
Preparation
Tools and materials required
The specified tools and materials are not included.
The information and values specified are non-binding
and are only provided as a reference. The nature
of the material is determined by the specific local
conditions.
- Pencil / marking tool
- Voltage tester
If you notice unusual oscilla-
Publicité
