Powerfix Profi HG05092 Instructions De Montage Et Consignes De Sécurité page 6

WARNING! RISK OF FATAL INJURY!
Please ensure that you do not drill into any
electrical wiring, gas or water pipes in the wall.
If necessary, carry out checks with a wire, pipe
and stud detector before you drill into a wall.
m CAUTION! DANGER OF INJURY!
Please ensure that no parts are damaged
and that all parts are correctly assembled.
Incorrect assembly or fitting may lead to injury.
Damaged parts can adversely affect safety
and proper function.
CAUTION! Do not leave children unattended!
The product is not a climbing frame or toy.
Make sure that the product is not used by
anyone, particularly children, to hang from
or climb on. This can result in injury and / or
damage.
Take care that the product is only installed by
competent persons.
Check the stability of the product prior to use.
Do not load the hooks beyond
the stated maximum load
(see "Technical data").
There is otherwise a risk of injury and / or
damage to the product.
Check regularly that the hooks are installed
securely and retighten the screws
The stability can be impaired when attaching
to furniture.
All of the fastening screws provided have to
be used.
WARNING!
Do not use anymore when the
product is damaged.
6 GB/IE/NI
Before installing the hook on a wall or ceiling,
check whether the chosen wall or ceiling
is suitable for installation of the product. If
necessary, seek expert advice.
Before installing the hook on a wall or ceiling,
please find out which installation material is
suitable for your particular wall or ceiling. We
have included installation material for walls
and ceilings that is suitable for standard, solid
masonry.
˜ Installation
Note: You will need an electric drill, a screwdriver
and hammer for installation.
m CAUTION! RISK OF INJURY! Please refer
to the operating instructions for your drill.
Install the hooks as shown in Figure A.
Note: Please observe the maximum
permissible load when using the hooks
(see "Technical data").
˜ Cleaning and care
Do not under any circumstances use corrosive
regularly.
E
or abrasive cleaning agents.
Use a slightly dampened, non-fluffing cloth to
clean the product.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
How to avoid property damage!