Rollplay 6V BMW i8 Spyder Manuel Du Propriétaire Et Instructions De Montage page 11

Assemble the Left Rear Wheel
1. Locate the rear washer (14), inner wheel spacer (11), and snap
pin (13) from blister box.
2. Slide a rear washer (14) onto the rear wheel axle.
3. Slide the inner wheel spacer (11) onto the rear left wheel axle.
4. Slide the rear wheel onto the axle.
5. Slide another rear washer (14) onto the rear axle.
6. Push the straight end of the snap pin (13) into the hole on the
axle.
7. Snap the rim onto the wheel, and snap the hubcap onto the
rim.
11