Publicité
Les langues disponibles
Les langues disponibles
There are three methods that can be used to install the
grille. Pick the method that suits your installation.
Style 1: Brackets are installed on top of the cabi-
net, toward the back, and springs are used
to secure the grille.
Style 2: (Optional) Brackets are installed on top of
the cabinet, toward the front, and the grille
is secured to the brackets with screws.
Style 3: The top of the grille is fastened to the ad-
joining cabinetry with a screw. This style is
used primarily for the custom overlay panel
style grilles to match surrounding cabinets.
-Hook the spring(s) into
the square holes toward
the top of the grill-
Back side of
grille shown
INSTALLING THE GRILLE
Style 1 mounting method:
1. Remove screw A in mounting bracket. Mount L-bracket
with screw A. See Figure 15.
2. Hook one end of spring (81050-000) through hole in
L-bracket. Holding the facia in position - stretch the
spring and secure the hook end to the facia through a
square top hole in the facia.
Figure 15
Style 1
14
-"L" bracket
-Anti-tip
bracket
Screw "A"-
-Spring
Publicité
