Publicité
Les langues disponibles
Les langues disponibles
Do not immerse product in water or other liquids and
avoid splashing liquids reach the unit.
Before carrying out any cleaning, disconnect the unit
from the electrical outlet.
Before each use, unroll the power cord. Do not insert
anything through the protection grids.
Place on solid and stable surfaces and away from
windows or drafts.
1 Control knob
4 Protective grid
ASSEMBLING
To mount the base (5), follow the steps below.
Take the two parts that make the base (5), insert the power cord between them and join them pushing until
they link each other. There is a cable hole in the edge of the base. Bring it towards the back of the appliance.
Put the 4 hooks placed in the bottom of product in the 4 holes of the base.
Fix the power cord under the base (5).
OPERATING
Once finished assembling unit, place the fan following the safety instructions, then plug to electrical outlet.
The TIMER knob (6):
Switches off the fan, if in position "OFF"
-
Leave the fan always on, if in position "ON"
-
-
Sets the timer (0-120 minutes), if rotated clockwise.
By using the control knob (8) the rotation power can be adjusted on different speeds.
0
The unit is OFF
1
Low speed
3
High speed
Medium speed and rotation
CLEANING
Disconnect the plug from the electrical outlet before attempting any cleaning operation.
Do not immerse the unit in water. In any case prevent splashes of water or other liquids reaching the motor
body. Do not clean the unit with metallic sponges or abrasive cleaners, only use neutral detergents and a soft
cloth moistened with water to clean the outer parts.
Dry the product completely before operating the unit.
TECHNICAL FEATURES
•
Power supply: AC 220-240V
•
3 operation speeds - Timer
•
Horizontal oscillation
DESCRIPTION G50049
2 Fan
5 Base
2
~
50-60Hz. Power 45W
3 Body
6 Timer
Medium speed
Low speed and rotation
High speed and rotation
9
Publicité
