ISOUND 5378 Guide De L'utilisateur page 8

LISTENING FROM LINE IN JACK
NOTE: To save electric power, unplug the AC/DC Adaptor from wall outlet if not used for long period of time
STANDBY SOURCE
1. Connect the Headphone/Earphone; Line out jack from the external audio player (such like MP3 player) jack on the unit to the LINE IN by
the supplied LINE in connection cable as the figure on right.
2. Press the STANDBY button on the unit or Remote Control to power on the unit. The orange indicator will turn on.
Note: If the unit is in BT (Bluetooth) mode, the blue indicator will light. Press the LINE button on the Remote Control to switch to LINE IN
mode.
3. Power on the connected external player and start playback as usual
4. Press the volume buttons to adjust volume level.
5. Play your audio as you normally would
6. Press the MUTE button to turn off the sound, press again to resume.
7. When finished listening, press STANDBY button on the unit or Remote Control to power off (Standby mode) the unit.
BLUETOOTH PAIRING AND PLAYBACK:
1. Power on the Sound Bar as previous procedures,
2. Press the SOURCE button on the Soundbar repeatedly until blue indicator light is lit or press the BT (Bluetooth) button on the Remote
Control to turn to BT mode.
3. The Soundbar is now in pairing mode. The BT indicator will flash while searching for BT signal.
4, Put your Bluetooth enabled device in Search Mode (please note: you may need to go into settings and turn Bluetooth ON) and select "BT
SOUNDBAR." If a password is required, type "0000."
5. Press the volume buttons to adjust volume level.
6. Play your audio as you normally would
7. Other operations are same as AUX IN mode.
NOTES:
The first time use, connect the external BT Player as below:
. Turn the Sound Bar to BT mode as previous procedures, the BT indicator will turn on and flash.
. Power on the external BT player and enter to BT searching mode. Start pairing as the on screen instructions on the external BT Player
or details pairing procedures, please refer to the user's manual of your BT player.).
. When the external BT player searched the Sound Bar, our model number "BT Soundbar" will appear on the display of external BT player.
. Pairing code "0000" may be needed. BEN =