Publicité
Les langues disponibles
Les langues disponibles
2/. Mounting the soundbar to drywall
You should use:
- 2 pieces of short screws
- 2 pcs plastic tubes
1. Use the TAPE
MEASURE to decide how high you'd like to hang the Speaker Bar on the wall. The SOUND Bar must be hung within 5
feet of an AC power outlet for the attached AC power cord to reach.
2. Mark the position of the mounting screws on the wall using a pencil.
3. Line the LEVEL up on both of your mark sure they are level. If they're not, adjust the marks as needed to make them level.
4, Drill a hole by a powerful electric drill.
5. Use a hammer to gently nail 2 plastic tubs into the holes.
6. Drill through the EVA with screws directly into the holes,
7. Use the LEVEL to check that the mounting screws are level.
8. Put the SOUND Bar onto the mounting brackets, and make sure there is a firm and stable connection before letting go of the
Soundbar.
9, Finally, use the LEVEL to confirm that the Sound Bar is level,
TROUBLESHOOTING GUIDE
No power
- Check the connection of the AC/DC adapter between the unit and wall outlet,
No sound
- Check that the volume control is NOT at minimum
- Check that it is NOT set to mute.
The remote control won't work
- Replace the battery.
- Make sure there are no obstacles obscuring the front of the unit.
GENERAL SPECIFICATIONS:
trente
DO 151,24
.DC 3V, 1X CR 2025 battery (Included)
Maximum 30W
Audio Power:
A
O
- Right Channel
Impedance of Speakers:
- Left Channel ...
...8 Ohm, 10W max
- Right Channel
+... ..8 Ohm, 10W max
Publicité
