Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CAUTION
To reduce
the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside, Refer servicing to qualified service
personnel.
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of un-insulated
"dangerous voltage" within the product's enclosure, may be sufficient magnitude to constitute a risk of electric. The exclamation point
within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
FCC WARNINGS
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment,
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter
unless authorized to do so by the FCC.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio
frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
+ Consult the dealer or an experienced radio/TV technician for help.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For
example, this unit may not have the capability to be connected to an outdoor antenna
1. Read these instruction - All the safety and operation instructions should be read before the product is operated.
2. Keep these instructions - The safety and operating instructions should be retained for future reference.
3. Heed all warning - All warnings on the product and in the operating instructions should be adhered to.
4, Follow all instructions - All operating and use instructions should be followed.
6. Clean only with dry clot - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked, by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed
near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been adhered to,
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. The provided does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
O. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit the apparatus.
1. Only use attachments/accessories specified by the manufacturer.
2. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving
the cart/apparatus combination to avoid injury from tip-over.
3. Unplug this apparatus during lightning storms or when used for long periods of time.
4. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate
normally, or has been dropped.
5. Power Source - The Product should be operated only from the
type of power source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
6. Overloading - Do not overload wall outlets and extension cords as this can result in a risk or fire or electric shock.
7. Object and liquid entry - Never push objects of any kind into the product through as they may touch dangerous voltage points or short out parts that could
result in fire or electric shock.
8. Service — Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all
servicing to qualified service personnel.
9. Wall or ceiling mounting — The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
20. Damage requiring service — unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
Publicité
