Publicité
Les langues disponibles
Les langues disponibles
POWER SOURCE
- Insert the small plug from the supplied AC adapter to the DC IN Jack on the unit.
- Insert the AC adaptor to wall outlet having AC 100-240V~ AC, 50/60 Hz.
NOTE: This power unit is intended to be correctly orientated in a vertical or floor mount position. AC/DC adapter
LISTENING FROM AUX IN JACK
1. Connect the AUX OUT jacks from the external audio player (such like DVD player, TV, VCR. ..etc.) to the AUX IN jacks on the rear of
Sound Bar by the supplied RCA connection cable as the figure above:
2. Connect the Sound Bar to the power as previous procedures. The red standby indicator will turn on.
3. Press the STANDBY button on the Sound Bar or Remote Control to power on the Sound Bar.
4. Press the SOURCE button on the unit repeatedly or press the AUX button on the remote control to turn to AUX mode. The white AUX
indicator will turn on.
5. Power on the connected external player and start playback as usual.
6. Press the volume buttons to adjust volume level.
7. Press the TREBLE buttons on the Remote Control to adjust treble as desired.
8. Press the BASS buttons on the Remote Control to adjust bass as desired.
9. Press the EQ preset mode buttons MUSIC; MOVIE or VOICE to turn on the preset EQ effect as desired.
10. Press the MUTE button to turn off the sound, press again to resume,
11. When finished listening, press STANDBY button on the Speaker or Remote Control to power Off (Standby mode) the Speaker.
LISTEN TO RADIO:
1. Power on the Sound Bar as previous procedures.
2. Press the SOURCE button on the unit repeatedly or press the FM button on the Remote Control to turn to
indicator light will turn on.
3. The first time you use the radio: Press the SCAN button on the Remote Control to start auto searching
minutes). The available FM stations will be stored into the Soundbar's internal memory list.
4. After scanning: Press the CH (Channel) + button to skip to next stored channel, press the CH (Channel) —
channel. Repeat the same procedures until the desired station are found and play.
5. Adjust the rest of the settings as you would for AUX, LINE IN or BLUETOOTH mode.
6
Radio (FM) mode. The FM Green
(Please note: It may take a few
button to skip to previous stored
Publicité
