Publicité
Les langues disponibles
Les langues disponibles
1. When charging Go Aquabiking,
insert the USB cable
into audio jack hole (h.) and connect it to the PC USB port.
It is recommended that you leave your MP3 player
to charge for minimum of 3 hours ( blue & red light
will flash during recharging). check when fully recharged,
lights will turn off to ensure optimum battery life.
Transferring music to your Go Aquabiking
2. Insert the USB cable into audio jack hole (h.) and
connect it to a PC.
3. The Go Aquabiking player will appear as a
removable
drive in 'My Computer'.
4. Select the music files you want to simply drag
and drop them onto the Go Aquabiking player.
5. When you are finished transferring music, right-click
on the SeaDragon player's icon and select 'eject'.
6
It is then safe to unplug.
How to operate
MP3 mode
1)
To switch the Go Aquabiking player on, press the ei)
button for two seconds till red & blue light goes on.
and MP3 music will start playing.
2)
To switch the Go Aquabiking player off, press the bil)
button for two seconds till red & blue light goes off.
3)
While playing music, the blue light will keep flashing,
and red light will keep off.
P.38
4)
5)
6)
7)
8)
9)
10)
11)
12)
While playing music, tapping the (+) or (>) buttons
once will skip a track or replay the previous one.
While playing music, press and hold the()or(—)buttons
to adjust the volume.
To make Go Aquabiking pause while music is playing short tap
il
to pause song play. Blue light will start from stable flash
and become quick flash, the red light will still keep off.
Short tap (©) again to continue playing. Blue light will
return to stable flash, and red light will keep off.
DSC mode
While in MP3 mode, hold M button down for 2 seconds
to change to DSC mode. Blue light will stop and red light
will be entire on.
While in DSC mode, blue light will be off, and red light will
be entire on. When pressing any button to take a single photo,
blue light will be entire on, and red light will be off.
The light will resume to blue light off and
red light on once the photo taking is finished.
DVR mode
While in DSC mode, hold M button down for 2 seconds
to change to DVR mode. Blue and red light will be entire on.
While in DVR mode, pressing any button will begin filming.
Blue light will be entire on and red light will be flashing.
While filming, pressing any button will stop
the recording. Blue and red light will be entire on.
P.39
Publicité
