Eastman Outdoors 38262 Instructions page 6

Clean the main housing with a wet towel soaked in warm water and do
not use any type of a cleaning chemical on the base.
Main Housing
Your grinder's Main Housing contains all of the moving mechanical parts
and electrical components so use proper care when cleaning. Make
sure that the Main Housing is unplugged from the outlet before cleaning.
Clean the Main Housing with a wet towel soaked in warm water. Do not
use any type of a cleaning chemical on the Main Housing.
WARNING
Metal and Plastic Parts of the Grinder
Wash the metal Grinder Housing, Locking Nut, Hopper Plate, Feed
Screw, and Cutting Plate in warm soapy water. All plastic accessories
are also to be washed warm soapy water. Rinse, clean and dry
thoroughly. The Cutting Plates and Blade are stainless steel and can
be washed in the dishwasher. No other parts should be washed in the
dishwasher. For storage you can apply a light coat of vegetable oil to
any or all of the metal parts. Wash all parts before the next use.
Follow these safety precautions while using your grinder or while
handling food:
WARNING
• Wash hands thoroughly prior to handling any food.
• Make sure all utensils, containers, and counter tops are thoroughly
cleaned and disinfected before using.
• Thoroughly clean and disinfect all cutting boards, wooden or plastic
• Before plugging in the grinder, make sure the switch is in the OFF
position
• After grinding, store ground items in refrigerator or freezer.
Do not immerse the Main Housing in water or any
other liquid. Failure to follow this warning may
result in electric shock, injury, or even death.
Precautions While Grinding
Do not use 昀椀ngers to scrape food away from
the discharge disc (Locking Nut area) while the
appliance is operating. Failure to follow may
result in cut type injuries. Avoid contacting
moving parts. Never feed food into the grinder's
head by hand. Always use the food pusher.
5