How To Assemble And Use - Reliable 500VB Guide D'utilisation

HOW TO ASSEMBLE AND USE

READ ALL INSTRUCTIONS BEFORE USE
1. Unfolding: Hold the ironing board in a vertical position with the tip downwards;
press the handle (5) placed underneath the board and lift up the working sur-
face by pulling with the foot outwards until the desired height is reached.
2. Unfold the boiler support (3) and place the steam generator on the shelf.
3. Insert the electrical plug into an electrical outlet.
4. Place the pedal (1) near the working area.
5. Push the on/off switch (2) on the "I" position.
6. For the 500VB model, the "I" position is for vacuum, "O" is neutral, and "II" is
for the up-air (blowing) function.
7. Wait for a few minutes until the working surface is warmed up.
8. Start ironing.
9. To activate the vacuum or up-air function, simply press on the foot pedal (1).
10. You can use the vacuum or the blowing function at the same time as you are
ironing, or you can use it after the ironing (for very light fabrics this may be
the preferred way).
11. At the end of the ironing we suggest you leave the on/off switch (2) on for a
few minutes to ensure the inside of the table is dry and free of condensation.
12. Folding: turn the on/off switch (2) off, remove the plug from the outlet. Take
the boiler and the iron off of the boiler support (3), fold the boiler support (3),
and make sure there is no garment on the working surface and/or on the catch
tray (4).
13. As soon as the working surface is cool, position the ironing board vertically
with the tip downwards, press the handle (5) placed under the working surface
and at the same time pull the legs (6) inward.
FOR HOUSEHOLD AND LIGHT COMMERCIAL USE ONLY. SAVE THESE INSTRUCTIONS
IN A SAFE PLACE FOR FUTURE REFERENCE.
ATTENTION
IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the gar-
bage. Instead, go to your closest recycling station or waste collection centre
for treatment.
03