Publicité
Les langues disponibles
Les langues disponibles
PROBLEMS
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
• The antenna could be disconnected.
or sound
• The input mode could be set improperly. See page 45.
• The tuner (Auto Tuner Setup) could be set improperly. See page 25.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not
• Check to see that the batteries are still working and properly installed.
operating properly or
• Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
• Make sure the channels have been programmed. See "Channel Summary", page 28.
certain channel
• Check to see if the channel is locked. See "Channel Summary - Lock" page 28.
The power turns off
• Make sure the set did not become unplugged.
by itself
• Perhaps the On/Off Timer is set. See page 40.
• Check to see if the Sleep Timer was set. See page 44.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 26.
The On Timer is
• There is a problem with the TV. Unplug the set and call for service.
blinking
The color quality
• Tint and Color may be improperly adjusted. See page 37.
is poor
• The Video Status mode may be turned to the wrong setting. See page 44.
There are lines
• There could be interference from another electrical appliance, such as a computer,
across the picture
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
The picture is spotted
There are double
• A building or passing airplane can reflect the original signal and produce a second,
pictures (ghosts)
Picture is snowy
• Your antenna may be damaged, disconnected or turned. Check the antenna
(image noise)
connection. If the antenna is damaged, replace it.
Screen is 40% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 41.
Stereo or bilingual
• Make sure the MTS settings are correct. See "MTS" on page 39.
programs can't be
heard
There is no picture
• Check your AV Cables to make sure they are connected tightly and properly.
being displayed for
• In case you are connecting using component cables to V2, make sure in the onscreen
V2 COMPONENT-IN
menu system, you have "YES" selected for the V2 COMPONENT-IN.
See page 16 and 42.
• In case you are connecting using composite cables to V2, make sure you have 'NO"
selected for the V2 COMPONENT-IN. See page 16 and 42.
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds
another TV or VCR. Move any such appliances further away from the TV.
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
slightly delayed one. Adjust your antenna position.
the sound or picture become abnormal, this is fine.
Troubleshooting
CHECK
49
Publicité
