Grandstream GWN7603 Guide D'installation Rapide page 4

HARDWARE INSTALLATION
GWN7603 can be mounted on the wall. Please refer to the following
steps for the appropriate installation.
Wall Mount
1. Use a measuring tape to measure the distance between the two wall
mount slots on the back of the GWN7603 access point and use a
pencil to mark the mounting screw holes on the wall.
2. Use a drill to make a hole at each marked point. Place the anchors
and screws on each hole. Leave enough space between the wall and
the screw head, then mount the GWN7603 on the screws using the
wall mounting slots.
Wall Mount
Slots
1
CONNECT TO GWN7603 DEFAULT Wi-Fi NETWORK
factory reset with Wi-Fi enabled by default.
After powering the GWN7603 and connecting it to the network,
GWN7603 will broadcast a default SSID based on its MAC address
GWN[MAC's last 6 digits] and a random password.
Note: GWN7603's default password information is printed on the
sticker on the back of the unit.
Wall
2
~3~
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7603's SSID, or to the same net-
face using one of the below methods:
Method 1: Discover GWN7603 using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7603,
type in following address using GWN7603's MAC address on your
browser https://gwn_<mac>.local
Example: If a GWN7603 has the MAC address C0:74:AD:8C:4D:F8,
this unit can be accessed by typing https://gwn_c074ad8c4df8.local
on the browser.
Method 2: Discover GWN7603 using GWN Discovery Tool
1. Download and install GWN Discovery Tool from the following link:
https://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryTool, and click on Scan.
3.
network showing their MAC and IP addresses.
~4~
-