Instructions for using other Type-A key tags
compliant with ISO/IEC 14443
• Other Type-A key tags compliant with ISO/IEC
14443 (for ex. library card, membership card
and public transport card) can be used as a
key tag for SOLSTOL lock. You can pair up to
10 key tags at the time with one lock.
• To add a new key tag, press and hold the
button for 2 seconds until a sound signal
can be heard. Hold the new key tag close to
the reader. The lock will emit a confirmation
sound when the new key tag is paired.
• To remove the pairing of key tags, reset the
lock.
WARNING
• Discard the product if damaged.
• Use only indoors.
• Never submerge in water or other liquids.
• Children should be supervised to ensure they
do not play with the product.
• Do not use batteries which are low in charge
or empty.
• Always insert the batteries into the charging
slots according to the polarity indications
(+/-).
• Risk of explosion if either battery is replaced
by an incorrect type.
• Do not mix batteries of different capacities,
types or date stamps.
6