IKEA SOLSTOL Mode D'emploi page 5

Instructions for use
• Install the lock and lock-plate according to
the assembly instructions for your product.
Ensure that nothing is blocking the lock's
pin after installation. If the pin is obstructed
when locking/unlocking, the lock will emit a
signal that indicates this.
• Insert batteries and check that both the
pre-paired key tags work with the lock before
first use. Note! The package does not include
batteries.
• Insert batteries and check that both the
pre-paired key tags work with the lock before
first use.
• To lock/unlock, hold the paired key tag close
to the reader. If an unpaired key tag is used,
the lock will emit a signal that indicates this.
• If batteries run low, the lock will emit a low
battery warning signal every 4 hours and
every time it is locked/unlocked. Replace the
batteries promptly. If the batteries are not
replaced before they die, the lock will open
automatically and remain open.
• To reset the lock, press and hold the button
for 10 seconds. Note! All paired key tags will
have their current pairing erased.
TIP!
We recommend that you put one of the paired
key tags in a safe place as a spare key. Note!
there are no spare key tags available at IKEA.
5