7
troubleshooting
FAULTCODE
DESCRIPTION
Inadequate water supply.
Water supply is not stopping.
The waste water can not be discharged.
The water temperature is not correct.
Heating defect.
Safety is activated against water
overflow.
Faulty electronics.
CHECK
• Check whether the tap is fully open and there nothing
blocking the water mains.
• Close the tap, remove the input hose and check whether it
is clogged.
• Start the dishwasher again. Contact the service
department of Inventum when the error remains.
• Close the tap.
• Contact the service department of Inventum.
• The water discharge hose is clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher's program
and check the filters and the discharge hose.
Restart the dishwasher.
• Contact the service department of Inventum when the
error remains.
• Contact the service department of Inventum.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
37
English
•