EIBENSTOCK EST 350.3 Notice Originale page 21

▪
To achieve a high level of dust collection, use industrial vacuum cleaner
(dust category M) for wood and/or minerals together with this tool.
▪
The work place must be well ventilated.
▪
The use of a dust mask of filter class P2 is recommended.
According to our general terms of delivery for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects (to be documented by invoice or delivery note). Damages due to
natural wear, overstressing or improper handling are excluded from this
warranty. Damages due to material defects or production faults shall be
eliminated free of charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
EU - Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or
standardization documents:
EN 62841-1:2016-07
EN IEC 55014-1:2022-12
EN 61000-3-2+A1:2019-03-05
IEC 63000:2019-05
EN
according to the provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EG
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig
General Manager
27.06.2024
Warranty
EN 62841-3-10:2015+A11:2017
EN IEC 55014-2:2022-10
EN 61000-3-3:2023-02
Frank Markert
Head of Engineering
21