WARRANTY AND AFTER-SALE SERVICES
Warranty
Warranty service as stated on the warranty card
The manufacturer shall not be held liable for any damage caused by improper use of the product.
CHANGING THE DIRECTION OF THE DOOR OPENING
1. Remove the upper hinge cover (1) first
2. Remove the screws (2) that hold the upper hinge to the frame. Take away the upper hinge (3).
3. Lift the door and place it on a padded surface to prevent scratching.
4. Remove the screws that hold the lower hinge (5), remove the lower hinge (6).
5. Remove the left front leg (7) and transfer it to the right side (8).
6. Remove the hole cover plate.
7. Install the lower hinge onto the left side of the lower frame with the screws through the opposite
holes.
8. Set the door in its place making sure it rests on the door seat at the lower hinge.
9. While holding the door in the closed position secure the upper hinge on the top left hand side with
the screws through the opposite holes. Do not tighten the screws until the top of the door is levelled
with the counter top.
10.Install the upper hinge cover on the upper hinge.
67